Airlift Aerator Draft Tube is 100% Solar Powered for Deep Water Mixing

Installing a floating  airlift aerator costs less and uses less energy than placing an air diffuser on the bottom of your pond or floating a fountain spray on top of the pond.  Our 4" solar powered draft tubes can turn 5 lpm of  fine bubble aeration into 50 lpm of top to bottom pond destratification mixing.  All while providing a zero carbon footprint and twice the oxygen transfer efficiency, at a fraction of the cost of maintenance of high pressure grid powered bubblers or high speed mechanical aerators. Powered by our solar aerators you will never pay a power bill for aeration again!!! Floating airlift aerators are the only way to go unless you are into daily maintenance schedules. Bottom mounted air diffusers are undesireable from every standpoint because they make: WATER CLOUDY:  Placing a diffuser on the bottom of the pond suspends solids that cloud the water  and uses up  available oxygen. HIGH ENERGY USE:  Every foot of diffuser depth  or fountain spray height  increases the cost of the aerator operation.  Draft tubes can use less than 10% of the energy while supplying the same oxygen transfer and mixing as fountains or bottom mounted diffusers. MAINTENANCE A NIGHTMARE:  Every foot of depth doubles the  pump mechanical stress and  maintenance costs. (ask them about the warranty!) PEC Draft Tube technology mixes at any depth while consuming less power than any other aerator.  By floating a 4" expandable pipe and placing tiny air bubbles 0.5-1.0 ft inside it, you can aerate any pond depth. You only need a PEC-45  air pump, capable of  0.8 psi pressure, no matter how deep your pond is. All other systems require 25-35 psi to create the same bubble size. Our EKBS-10A DT pumps more than 15 gpm, using an ALAB fine bubble diffuser, at any pond depth you choose.

Instructions for assembling your own floating airlift aerator draft tube from standard PVC parts available at any hardware store are shown below.

Attach float to  tube support metal clips.

Attach airline to push on nozzle.

Screw float top locking cap tight.

Expand draft tube to desired depth or bend tube to protect from bottom mud.  Standard depth is 6 ft.  Deeper ponds require addtional tubes to any depth.

Place unit in pond and secure with nylon rope tied to float tube metal hasp and bottom mounted weight. Periodically clean bottom leaf strainer grate.  Annually inspect diffuser for plugging.

NOTE:  DRAFT TUBE BUOYANCY  REQUIRES USE OF NON-WEIGHTED AIRLINE ONLY. NON-WEIGHTED AIRLINE CAN BE  BOTTOM MOUNTED BY ATTACHING  BRICKS  AS SHOWN.

Airlift Aerator Operation On You-Tube Click Here

Faux  rock floats for the draft tubes are sold seperately.  Click here so the only thing  above the waterline is a bubbling fake rock.  Pretty to behold!

Model                 **Gallons/day         *DT Air Flow        ***Maximum lbs/day                                                                                     EKBS-10 A                     43200                          1.5                      2 EKBS-15                        72000                          2.8                     4 EKBS-20                        115200                        5.6                     6 *Calculated values for ALAB fine bubble diffusers mounted inside PEC floating draft tubes. Each 2.5x12" DT mounted diffuser can be supported by one PEC 45 airpump and supply 100% of the oxygen demand of approximately 1000-2000 kg (+2200 lbs.)  of fish with an efficiency approaching 100% transfer of oxygen into solution.  Our  EKBS-20 units are capable of supporting up to 6 ALAB diffusers. ** click here for actual ALAB diffuser airlift test results. ***PEC recommends a minimum of one PEC-45 pump in conjunction with our draft tube(s) for each pound of food applied to the pond daily.

We build it for you, any length, for any pond depth.  Call for pricing toll free. 888-261-4726

1520 N. 6th Street Springfield, IL. 62702 email: info@solaerator.com

CLICK HERE FOR ALL OUR SOLAR BUBBLER AERATORS